●Network general controller
●1 RJ45 port, 2 RS485 ports
●AC/DC 24V working voltage
●16 analog input points for NTC10K, 0…10 V, 4…20mA
●16 digital input points (dry contact)
●8 analog output points output DC 0…10 V signal
●8 relay outputs
●Support Modbus TCP and BACnet IP protocol
●Can bring 5 similar expansion modules
●Support to connect touch screen
The network general controller is mainly suitable for comfort control of HVAC system and refrigeration system. It can be installed separately in the control panel or on the pipe, on the wall and in the machine room. Can run independently or online.
Built-in direct controller application
The controller utilizes a stand-alone Direct Digital Control (DDC) that provides proper HVAC control and comprehensive information about system operation. The controller receives information from sensors in the field and directly controls the equipment. The controller has the following functions:
Closed loop proportional, integral and derivative (PID) control
Logical sequence control
Alarm monitoring and reporting
List of input and output points
|analog point||digital point||analog point||digital point|
PCC3216 is a network-based controller. The graphical programming software provides rich programming modules, which can be used for HVAC control and independent control of small projects.
PCC3216 supports BACnet IP and Modbus TCP dual protocols at the same time, and multiple PCC3216s can be connected to form a network in large-scale projects.
The control point of PCC3216 can control building equipment such as chillers, air conditioners, fresh fans, etc., directly through the basic network of the building to form the energy management system of the building. convenience.
Housing PCC3216 controller is a compact unit according to DIN 43 880 Gr. 1
Installation Methods The PCC3216 controller has the following installation methods:
Installed in standard electrical control box according to DIN 43 880 standard rail
Wall mounted in protective enclosure
Terminal block Plug-in screw-on terminal block
AC/DC 24V ±20%
RJ45 interface (1)
RS485 interface (2)
Device Instance is defined by software