Mobile: 19875181874
Tel: 020-81376938
Fax: 020-81376938
Email: sales@rogerwell.com
Address:The fourth floor of Block B, Wuyanqiao Industrial Village, No. 388 Fangxing Road, Liwan District, Guangzhou
Lighting switch controller
PCL0808
Performance
● Lighting controllers
● 2 RS485 interfaces
● DC 24V operating voltage
● 2 digital inputs DI (dry contacts)
● 8 magnetic latching relay outputs DO with manual switch (20A@220VAC)
● 1 sensor access
● 1 RS485 panel input
● BACnet MS/TP or Modbus RTU protocol
Use
The main function is the input of remote lighting switch, controlling the switching of lighting circuit. It can operate independently or in a network. Communication interface 1 is RS485, communication protocol is BACnet MS/TP or Modbus RTU, communication interface 2 is RS485, R-BUS private protocol
Built-in direct controller application
The lighting controller uses an independent Direct Digital Control (DDC) that provides monitoring of the lighting circuit. The controller has the following functions:
●Switch control
●Schedule control
●Mode control
List of input and output points
| enter | output | model | ||
| analog point | digital point | analog point | digital point | |
| 0 | 2 | 0 | 8 | PCL0808 |
Mechanical Design
Housing PCL0808 controller is a compact unit according to DIN 43 880 Gr. 1
Installation methods PCL0808 controller has the following installation methods:
Installed in standard electrical control box according to DIN 43 880 standard rail
●Wall mounted in protective enclosure
●Installation from the front with standard mounting elements (screws)
Terminals Plug-in terminals are screwed on.
Technical data
power supply | Operating Voltage | DC 24V ±20% |
Frequency | 50Hz | |
CPU | Cortext-M3 | |
RAM | 128K | |
FLASH | 512K | |
Power consumption | PCL0808 | 20VA |
Communication Interface | RS485 interface | BACnet MS/TP/Modbus |
transport environment | temperature | -25~70℃ |
humidity | ＜95% RH | |
working environment | temperature | 0~50℃ |
humidity | ＜95% RH | |
IP rating | IP20 EN60529 | |
Product Standards | Standard for automatic control of air-con ditioning related applications | EN 60730 |
| Terminals | Plug-in screw-on terminals, suitable for: Smaller diameter 1.5mm | |
Large diameter 2x1.5mm² | ||
Controller size | 180mm X 87mm X64mm (L X W X H) | |
| address definition | Device Instance and MAC address are defined by software | |
