PFC100 Series Inverter
Adopt international advanced current vector control technology, low-speed rated torque output, ultra-quiet and stable operation, various control methods, up to 36 kinds of perfect protection and alarm functions, online monitoring and online adjustment of various parameters, built-in RS-485 communication interface, flexible operation, can meet the widest range of user needs; PFC100 incorporates the asynchronous machine's motor control algorithm, can expand the PLC card, PG card, and IO card, and can realize the asynchronous machine's open-loop and closed-loop control, as well as torque, speed, and position control; through PLC It can realize small and medium-sized projects through programming. The equipment's procedure provides a cost-effective open platform for system integrators and user engineers to meet the most stringent needs of varied industrial sites.
This series of inverters is suitable for a wide range of motor drive applications, including machine tools, textiles, plastic machinery, food, cement, printing and dyeing, metallurgy, steel, and other industries; as a speed control device, it has high load adaptability, stability, precision, and reliability. It's excellent. As an electrical energy-saving application, it can maximize power factor and efficiency.
● It can achieve precise control of asynchronous machine torque, speed, and position
●Through IO expansion; it can achieve 12 digital inputs and 7 outputs; 2 analog inputs and 2 outputs; it can achieve closed-loop control of the asynchronous machine
●Through the PG card to meet high-end control requirements; it can achieve programming of small and medium-sized equipment
●Through the extremely cost-effective PLC card. The value of system integrators and field engineers is largely reflected by programming, which realizes the technical process of small and medium-sized equipment.
Keyboard and Tray Mounting (Open Hole) Dimensions
Table A1-1 Keyboard installation dimensions (unit: mm)
0.75KW and above
Note: There are two kinds of keyboards: ordinary keyboard and keyboard with parameter copy function, and the two keyboards have the same size.
Keyboard tray installation opening size 115*75mm
Appendix 1 External Dimensions and Installation Dimensions
Table A1-2 Dimensions (unit: mm)
Table A1-3 Dimensions (unit: mm)
Rated output voltage
0～rated input voltage
Model G: 150% for 1 minute, 180% for 20 seconds;
P-type machine: 120% for 1 minute, 150% for 1 second;
way to control
Flux Vector Control / Current Vector Control
Frequency control range
Low frequency mode: 0.00～650.0Hz; High frequency mode: 0.0～1000Hz (reserved)
Digital command ±0.01% (-10℃～+40℃) Analog command ±0.01% (25℃±10℃)
Set frequency resolution
Digital command 0.01Hz; analog command 1/1000 maximum frequency
Output frequency resolution
Frequency setting signal
Acceleration and deceleration time
0.1～3600.0 Seconds（Independent setting of acceleration and deceleration time）
Additional braking resistor up to 125%
4 kinds of fixed V/F characteristics can be selected and arbitrary V/F characteristics can be set, with PG V/F control
Overvoltage, undervoltage, current limit, overcurrent, overload, electronic thermal relay, overheating, overvoltage stall, load short circuit, grounding, undervoltage protection, input phase loss, output phase loss, short circuit to ground and phase, motor overload protection, etc.
Use ambient temperature
5～95% RH（no condensation）
place of use
Indoor (no corrosive gas)
The altitude is not higher than 1000 meters, no dust, no corrosive gas and no direct sunlight.
3PH 380V 50/60Hz
Voltage range: 304～456V
Voltage unbalance rate: less than 3%
Frequency unbalance rate: less than ±5%